# The Bicycle Field Manual

> A step-by-step guide to equipment, balance, pedaling, braking, and navigating your surroundings.

This guide is for a conventional bicycle with hand-operated brakes. Start on flat, firm ground away from traffic. Learn each movement separately before combining them.

## Before you roll

- **Air:** Check that tires are firm and use the pressure recommended on the sidewall.
- **Brakes:** Squeeze both levers and gently roll the bike. Each brake should stop its wheel.
- **Chain and fit:** Check that the chain runs smoothly, wheels are securely attached, and the saddle is secure. For first balance practice, lower the saddle so both feet rest flat on the ground while seated.
- **You:** Wear a properly fitted helmet, secure loose clothing, and use lights when needed. Bring water and a lock.

The interactive checklist, gear selector and assessment on the HTML page are temporary and reset on reload. The bicycle illustration labels the saddle, handlebars and pedals.

## The first ride: from standing to stopping

1. **Get on.** Stand beside the bike. Hold both handlebars and squeeze both brakes so it cannot roll. Lean it slightly toward you, step through the frame or swing a leg over the saddle, and sit down with both feet on the ground.
2. **Find your hands.** Wrap one hand around each handlebar grip, with fingers able to reach the brake levers. Keep elbows soft and shoulders relaxed. Practice gently squeezing both levers while stationary.
3. **Walk, then glide.** While seated, push against the ground with your feet to walk forward. Look ahead. Lift both feet briefly as you roll, then put them down again. Repeat until a short glide feels comfortable.
4. **Set a pedal.** Stop and hold the brakes. Put your preferred foot on its pedal with the pedal raised forward at about two o'clock. Keep your other foot on the ground. Place the ball of your foot on the pedal.
5. **Push and pedal.** Look ahead, release the brakes, push down on the raised pedal and push off with your grounded foot. Once rolling, lift that foot onto the other pedal. Press each pedal in turn and keep your hands on the grips.
6. **Steer, stop and step off.** Look where you want to go and steer gently. Ease off pedaling and gradually squeeze both brakes. Put one foot down as you slow, then the other. Hold the brakes and step back over or through the frame.

Practice starting, gentle turns and stopping before riding farther. Once you pedal confidently, raise the saddle to a comfortable riding height with a slight knee bend at the bottom of the stroke. The HTML diagrams show the grips and brake levers and a pedal in the raised forward starting position. See [Cycling UK's beginner teaching guide](https://www.cyclinguk.org/teaching-adults).

## Bicycle skills self-assessment

This self-assessment suggests practice areas. It is not a test of road readiness or a substitute for an instructor. For each skill, choose: not yet or not tried; with support or not consistently; or independently and consistently. Assess skills in a suitable traffic-free area. The interactive version does not save or transmit answers and clears them on reload.

1. **Check the bicycle:** Can you check the tires, brakes, secure wheels and saddle before riding? If not, use the equipment checklist and ask a qualified mechanic or instructor about anything uncertain.
2. **Mount and position yourself:** Can you hold the brakes, get onto the bicycle, place your hands on the grips and reach the ground? Practice getting on and off with the brakes held and the beginner saddle height adjusted.
3. **Glide and balance:** Can you push off with your feet and glide briefly while looking ahead? Walk forward while seated and lift your feet briefly, repeating until controlled.
4. **Start and pedal:** Can you position a pedal, push off, find the second pedal and keep pedaling? Practice setting one pedal forward and upward before pushing off.
5. **Steer and stop:** Can you steer gently, slow down smoothly using both brakes and put a foot down? Practice turning and progressive braking on firm, flat ground.
6. **Observe and communicate:** Can you look behind without drifting and signal with one hand when safe? First practice looking back while maintaining a straight line, then add one-handed riding in a safe area.
7. **Plan a suitable ride:** Can you choose a suitable route or area and adapt your ride to your ability, weather, traffic and local rules? Choose a quiet route or area with manageable crossings and a place to stop.

The HTML wizard prioritizes the skills marked not yet, followed by those needing support or consistency; its feedback reflects only the answers given.

## How riding works

- **Balance and steering:** A moving rider maintains balance through small steering corrections. Steering toward a lean moves the wheel contact points under the rider and bicycle. Balance also depends on speed, the bicycle, and the rider’s responses.
- **Propulsion:** Pedal force turns the crank. The chain and gears transmit that rotation to the rear wheel, and tire contact with the ground provides the traction needed to move forward.
- **Braking and grip:** Brakes slow the wheels by friction. Kinetic energy increases with the square of speed, and stopping distance depends on reaction time, braking force, slope, and tire grip.

Further reading: [Research on rider steering and balance](https://doi.org/10.1080/00423114.2022.2048865).

## Gears

Gears change how far the bicycle travels for each pedal revolution. On a derailleur system, shift while pedaling lightly and before you need the new gear. A lower gear generally requires less pedal force for the same resistance but more pedal revolutions for a given distance. It can help when starting or climbing. A higher gear travels farther per pedal revolution but generally requires more pedal force against the same resistance; it can be useful at higher speeds or on flatter ground. The HTML comparison is conceptual, not a drivetrain diagram.

## Look around

- **Junctions:** Slow down, look in all directions, and make eye contact when possible. Signal turns when it is safe to take a hand off the bar.
- **Parked cars:** Leave space for doors to open, watch for people in cars, and avoid weaving between parked vehicles.
- **Wet conditions:** Slow down and allow more braking distance. Painted lines, leaves and metal covers can be slippery.

## Plan a route

Favor protected cycleways and quieter streets where available. Check distance, hills, surfaces and busy crossings. Allow time for breaks and wrong turns. Follow local traffic rules and choose a route that suits your confidence. The route map on the HTML page is illustrative and is not a real navigation service.

### Ride without a fixed destination

You can leave without selecting a destination or predetermined route, choosing turns as you go on paths and streets that suit your ability and conditions. Keep track of time, weather, energy and how to return. Consider a familiar area or a map if you want help finding your way back. Pause, change direction or end the ride whenever you choose.

## Best-practice catalogue

Adapt these practices to the rider, cycle, conditions and local rules. Build each skill away from traffic before adding complexity.

### Before setting off
- Check tire pressure, brakes, secure wheels and saddle, and the chain.
- Use a correctly fitted helmet, secure loose clothing, and check required lights and reflectors.
- Choose a route or riding area for your experience; check weather, surfaces, crossings and options to stop.

### Control and balance
- Practice mounting, gliding, setting a pedal, starting, steering and stopping on firm, level ground without traffic.
- Look ahead, keep a relaxed grip and keep fingers able to reach the brakes.
- Brake progressively with both brakes; practice stopping before increasing speed.

### Observation and communication
- Scan ahead and check behind before changing position or setting off; practice looking back without drifting.
- Signal where appropriate, when you can safely control the cycle with one hand.
- Approach junctions at a speed that lets you observe, yield where required, and stop if necessary.

### Shared space and conditions
- Leave space around people and parked vehicles, including room for doors to open; pass only when safe.
- Reduce speed and increase following and stopping distance when grip or visibility is reduced.
- Ride predictably, use required lights, follow local traffic rules and stop to reassess when a situation exceeds your confidence.

Further guidance: [Bikeability Ride Guide](https://www.bikeability.org.uk/wp-content/uploads/2024/06/Ride_Guide_V10.pdf) and [Cycling UK on positioning and junctions](https://www.cyclinguk.org/road-position). These sources describe UK practice; local rules differ.

## Glossary

- **Brake lever:** A hand control that operates a brake to slow a wheel.
- **Cadence:** The pedaling rate, usually measured in crank revolutions per minute.
- **Cassette:** A cluster of sprockets at the rear wheel on many geared bicycles.
- **Chainring:** A toothed front gear attached to the crank assembly that drives the chain.
- **Crank:** The arm connecting a pedal to the axle that turns when the rider pedals.
- **Derailleur:** A mechanism that moves the chain between sprockets or chainrings to change gear.
- **Drivetrain:** The parts that transmit pedal motion to the driven wheel, such as cranks, chain and gears.
- **Freewheel / coasting:** A freewheel mechanism allows the driven wheel to keep turning while the pedals are stationary. Coasting is riding without pedaling.
- **Gear ratio:** The relationship between pedal rotation and driven-wheel rotation determined by the selected gearing.
- **Gliding:** Rolling with both feet off the ground, without necessarily pedaling, to practice balance.
- **Grip:** The part of a handlebar held by the rider; also, tire traction, depending on context.
- **Lower gear:** A gear in which each pedal revolution moves the cycle a shorter distance, generally requiring less pedal force against the same resistance.
- **Saddle:** The bicycle’s seat, supported by a seatpost.
- **Sprocket:** A toothed wheel that engages the chain.
- **Traction:** The frictional interaction between the tire and surface that enables acceleration, braking and steering.
- **Wheel contact point:** The area where a tire meets the ground; more precisely, contact occurs over a small patch.

Terminology adapted from [Cycling UK’s glossary](https://www.cyclinguk.org/article/beginners-guide-cycling-jargon) and [drivetrain guide](https://www.cyclinguk.org/article/beginners-guide-cycles-drivetrain).

## Observed speed and gearing

These published means describe particular groups and conditions; they are not universal averages or performance targets.

| Measure | Reported mean | Population and context |
| --- | --- | --- |
| Trip speed | 15.3 km/h | Conventional-bicycle group in a German naturalistic study; 28 riders. [Schleinitz et al.](https://doi.org/10.1016/j.ssci.2015.07.027) |
| Number of gears | 14.0 / 18.1 | Mean bicycle gear counts for the women’s and men’s groups, respectively, in a Stockholm commuter study; 10 participants in each group. [Study, Table 4](https://pmc.ncbi.nlm.nih.gov/articles/PMC7739755/) |
| Commute speed | 16.8 / 20.1 km/h | Mean speeds in those same women’s and men’s groups, respectively. [Study, Table 4](https://pmc.ncbi.nlm.nih.gov/articles/PMC7739755/) |

The Stockholm participants were habitual, middle-aged commuters, and the study groups were small. The German sample also included electric-assist riders, but the speed reported above is for its conventional-bicycle group. Terrain, route, conditions, bicycle type, and measurement method affect the result.

## References

1. [Rider control identification in cycling taking into account steering torque feedback and sensory delays](https://doi.org/10.1080/00423114.2022.2048865), *Vehicle System Dynamics*.
2. [How to teach an adult to ride a bike](https://www.cyclinguk.org/teaching-adults), Cycling UK.
3. Schleinitz K, et al. [The German Naturalistic Cycling Study](https://doi.org/10.1016/j.ssci.2015.07.027), *Safety Science*, 2017;92:290–297.
4. [Perspectives on Exercise Intensity, Volume and Energy Expenditure in Habitual Cycle Commuting](https://pmc.ncbi.nlm.nih.gov/articles/PMC7739755/), Table 4.

## More information

- [Privacy information](privacy.html)
- [Legal notice / Impressum](https://exaptation.eu/legal)

## Virtual bicycle training course

Explore a four-week virtual bicycle training course to become a certified bicycle expert. [Explore the course](course.md). The linked page presents Exaptation’s message about how organisations distribute knowledge and links to its website; it does not contain enrollment or certification details.
