Illustrated practical primer   /   Bicycle science

How to ride a bike.

A step-by-step guide to equipment, balance, pedaling, braking, and navigating your surroundings.

Start the guideBeginner methods
and evidence
Figure 1Conventional bicycle
RIDER
POWERED
Figure 1. Basic form of a conventional bicycle.
Balance   ✳   Steering   ✳   Propulsion   ✳   Braking   ✳   Awareness

Abstract

Riding a bicycle combines balance, propulsion, braking, and awareness of the surrounding environment. This illustrated primer explains a practical sequence for beginning riders, the mechanisms that support control, and the factors involved in choosing a route. Selected published observations provide context for riding speed and bicycle gearing; they are not performance targets.

01Before you roll

Check the bicycle.

Before riding, inspect the tires, brakes, wheels, chain, and saddle. The checklist covers a basic pre-ride inspection.

Figure 2. Basic bicycle components
Saddle
Handlebars
Pedals
0 / 4 checks complete
02First ride

From standing to riding.

Practice on flat, firm ground away from traffic. Learn each movement separately before combining them.

1. Get on.

Stand beside the bike. Hold both handlebars and squeeze both brakes so it cannot roll. Lean it slightly toward you, step through the frame or swing a leg over the saddle, and sit down with both feet on the ground.

2. Find your hands.

Wrap one hand around each handlebar grip, with your fingers able to reach the brake levers. Keep your elbows soft and your shoulders relaxed. Practice gently squeezing both levers while standing still.

3. Walk, then glide.

Seated, push against the ground with your feet to walk the bike forward. Look ahead. Try lifting both feet briefly as you roll, then set them down again. Repeat until a short glide feels comfortable.

4. Set a pedal.

Stop and hold the brakes. Put your preferred foot on its pedal with the pedal raised forward at about two o’clock. Keep your other foot planted on the ground. Place the ball of your foot on the pedal.

5. Push and pedal.

Look ahead, release the brakes, push down on the raised pedal, and push off with your grounded foot. Once rolling, lift that foot onto the other pedal. Press each pedal in turn and keep your hands on the grips.

6. Steer, stop, step off.

Look where you want to go and steer gently. To stop, ease off pedaling and gradually squeeze both brakes. Put one foot down as you slow, then the other. Hold the brakes and step back over or through the frame.

GRIP + BRAKEGRIP + BRAKE

Hand position

One hand on each grip; fingers can rest near the brake levers. Your hands steer and control the brakes. Keep your grip secure but not tense.

START HEREABOUT 2 O'CLOCK

Pedal position

Start with one foot on the raised forward pedal and the other on the ground. After pushing off, put the second foot on its pedal and alternate pressure.

Balance and steering

A moving rider maintains balance through small steering corrections. Steering toward a lean moves the wheel contact points under the rider and bicycle. Balance also depends on speed, the bicycle, and the rider’s responses.

Propulsion

Pedal force turns the crank. The chain and gears transmit that rotation to the rear wheel, and tire contact with the ground provides the traction needed to move forward.

Braking and grip

Brakes slow the wheels by friction. Kinetic energy increases with the square of speed, and stopping distance depends on reaction time, braking force, slope, and tire grip.

For a study of steering and balance, see reference 1.

Practice each step on flat, firm ground away from traffic. Repeat starting, gentle turns and stopping before riding farther. Once you pedal confidently, raise the saddle to a comfortable riding height with a slight knee bend at the bottom of the stroke. See the beginner teaching guide in reference 2.

Interactive learning tool

Bicycle skills self-assessment

Reflect on seven fundamental skills and receive suggestions for what to practice next. Choose the answer that best describes what you can do consistently in a suitable, traffic-free practice area.

This self-assessment is not a test of road readiness or a substitute for an instructor. Answers stay in this page and are cleared when it is reloaded.

03Mechanical advantage

Understanding gears.

Gears change how far the bicycle travels for each pedal revolution. On a derailleur system, shift while pedaling lightly and before you need the new gear.

Conceptual comparison
EASY
SPIN
MORE
TURNS
Figure 3. Conceptual gear comparison; not a drivetrain diagram

Lower gear.
More revolutions.

A lower gear generally requires less pedal force for the same resistance, but more pedal revolutions for a given distance. It can help when starting or climbing.

Try the buttons to compare
04Look around

Observe your surroundings.

Road users, parked vehicles, weather, and surface conditions affect the space and time needed to ride and stop safely.

At junctions

Slow down, look in all directions, and make eye contact when possible. Signal turns when it’s safe to take a hand off the bar.

Near parked cars

Leave space for doors to open. Watch for people in cars and avoid weaving in and out between parked vehicles.

When it’s wet

Slow down and give yourself more braking distance. Painted lines, leaves, and metal covers can become slippery.

05Plot your course

Plan a suitable route.

Evaluate the route for traffic exposure, surface quality, gradients, distance, and the rider’s experience.

STARTDESTINATION

Assess the route before departure.

Review the route and weather before leaving. Consider distance, gradient, crossing points, available cycleways, and your own endurance.

  • 01Favor protected cycleways and quieter streets where available.
  • 02Check distance, hills, surfaces, and busy crossings.
  • 03Allow time for breaks, navigation, and changing conditions.
  • 04Follow local traffic rules and choose a route that suits your confidence.
Alternative approach

Ride without a fixed destination.

You can leave without selecting a destination or a predetermined route. Choose turns as you go, following paths and streets that suit your ability and the conditions.

Keep track of the time, weather, energy, and how to return. Consider a familiar area or a map if you want help finding your way back. You can pause, change direction, or end the ride whenever you choose.

Practical reference

Best-practice catalogue

Use these practices as a starting point and adapt them to your cycle, abilities, conditions, and local rules. Build each skill in a low-traffic environment before adding complexity.

1. Before setting off

  • Check tire pressure, brakes, secure wheels and saddle, and the condition of the chain.
  • Use a correctly fitted helmet, secure loose clothing, and check that required lights and reflectors work.
  • Choose a route or riding area for your experience; check weather, surfaces, crossings, and options to stop.

2. Control and balance

  • Practice mounting, gliding, setting a pedal, starting, steering, and stopping on firm, level ground without traffic.
  • Look ahead, keep a relaxed grip, and keep your fingers able to reach the brake levers.
  • Brake progressively with both brakes; practice stopping before increasing speed.

3. Observation and communication

  • Scan ahead and check behind before changing position or setting off; practice looking back without drifting.
  • Use clear signals where appropriate, when you can safely control the cycle with one hand.
  • Approach junctions at a speed that lets you observe, yield where required, and stop if necessary.

4. Shared space and conditions

  • Allow space around people and parked vehicles, including room for doors to open; pass only when safe.
  • Reduce speed and increase following and stopping distance when visibility or grip is reduced.
  • Ride predictably, use required lights, follow local traffic rules, and stop to reassess when a situation exceeds your confidence.

Further guidance: Bikeability Ride Guide and Cycling UK on positioning and junctions. These sources describe UK practice; local rules differ.

Terminology

Glossary

Terms used throughout the guide. Components and controls can vary by bicycle.

Brake lever
A hand control that operates a brake to slow a wheel.
Cadence
The rate of pedaling, usually measured in crank revolutions per minute.
Cassette
A cluster of sprockets mounted at the rear wheel on many geared bicycles.
Chainring
A toothed front gear attached to the crank assembly that drives the chain.
Crank
The arm connecting a pedal to the axle that turns when the rider pedals.
Derailleur
A mechanism that moves the chain between sprockets or chainrings to change gear.
Drivetrain
The parts that transmit pedal motion to the driven wheel, such as cranks, chain, and gears.
Freewheel / coasting
A freewheel mechanism allows the driven wheel to keep turning while the pedals are stationary. Coasting is riding without pedaling.
Gear ratio
The relationship between pedal rotation and driven-wheel rotation, determined by the selected gearing.
Gliding
Rolling with both feet off the ground, without necessarily pedaling, to practice balance.
Grip
The part of the handlebar held by the rider; also, traction between tire and ground, depending on context.
Lower gear
A gear in which each pedal revolution moves the cycle a shorter distance, generally requiring less pedal force against the same resistance.
Saddle
The bicycle’s seat, supported by a seatpost.
Sprocket
A toothed wheel that engages the chain; rear sprockets are used to select different gears on many bicycles.
Traction
The frictional interaction between the tire and the surface that enables acceleration, braking, and steering.
Wheel contact point
The area where a tire meets the ground; more precisely, the tire contacts the ground over a small patch.

Terminology adapted from Cycling UK’s glossary and drivetrain guide.

06   /   Evidence

Observed speed and gearing

Published averages describe particular groups and conditions. They should not be treated as a target for a beginner or as a universal average for all bicycles.

Table 1. Examples from two observational studies.
MeasureReported meanStudy population and context
Trip speed15.3 km/hConventional bicycle group in a German naturalistic study; 28 riders. [3]
Number of gears14.0 / 18.1Mean bicycle gear counts for the women’s and men’s groups, respectively, in a Stockholm commuter study; 10 participants in each group. [4]
Commute speed16.8 / 20.1 km/hMean commute speeds in those same women’s and men’s groups, respectively. [4]

The Stockholm groups were small and consisted of habitual, middle-aged commuters; their values do not establish a population-wide average. The German sample also included e-bike riders, but the speed shown here is for its conventional-bicycle group. Terrain, route, conditions, bicycle type, and measurement methods affect results.

Practice and progression

Build skills gradually.

Repeat starting, steering, and stopping in a traffic-free area before progressing to more complex environments.

Back to the beginning
Sources and further reading

References

  1. Rider control identification in cycling taking into account steering torque feedback and sensory delays. Vehicle System Dynamics. doi:10.1080/00423114.2022.2048865.
  2. Cycling UK. How to teach an adult to ride a bike. cyclinguk.org/teaching-adults.
  3. Schleinitz K, Petzoldt T, Franke-Bartholdt L, Krems JF, Gehlert T. The German Naturalistic Cycling Study: comparing cycling speed of riders of different e-bikes and conventional bicycles. Safety Science. 2017;92:290–297. doi:10.1016/j.ssci.2015.07.027.
  4. Perspectives on Exercise Intensity, Volume and Energy Expenditure in Habitual Cycle Commuting. Table 4. Full text at PubMed Central.
Virtual course · 4 weeks

Become a certified bicycle expert.

Explore a four-week virtual bicycle training course.

Explore the course