1. Get on.
Stand beside the bike. Hold both handlebars and squeeze both brakes so it cannot roll. Lean it slightly toward you, step through the frame or swing a leg over the saddle, and sit down with both feet on the ground.
A step-by-step guide to equipment, balance, pedaling, braking, and navigating your surroundings.
Riding a bicycle combines balance, propulsion, braking, and awareness of the surrounding environment. This illustrated primer explains a practical sequence for beginning riders, the mechanisms that support control, and the factors involved in choosing a route. Selected published observations provide context for riding speed and bicycle gearing; they are not performance targets.
Before riding, inspect the tires, brakes, wheels, chain, and saddle. The checklist covers a basic pre-ride inspection.
Practice on flat, firm ground away from traffic. Learn each movement separately before combining them.
Stand beside the bike. Hold both handlebars and squeeze both brakes so it cannot roll. Lean it slightly toward you, step through the frame or swing a leg over the saddle, and sit down with both feet on the ground.
Wrap one hand around each handlebar grip, with your fingers able to reach the brake levers. Keep your elbows soft and your shoulders relaxed. Practice gently squeezing both levers while standing still.
Seated, push against the ground with your feet to walk the bike forward. Look ahead. Try lifting both feet briefly as you roll, then set them down again. Repeat until a short glide feels comfortable.
Stop and hold the brakes. Put your preferred foot on its pedal with the pedal raised forward at about two o’clock. Keep your other foot planted on the ground. Place the ball of your foot on the pedal.
Look ahead, release the brakes, push down on the raised pedal, and push off with your grounded foot. Once rolling, lift that foot onto the other pedal. Press each pedal in turn and keep your hands on the grips.
Look where you want to go and steer gently. To stop, ease off pedaling and gradually squeeze both brakes. Put one foot down as you slow, then the other. Hold the brakes and step back over or through the frame.
One hand on each grip; fingers can rest near the brake levers. Your hands steer and control the brakes. Keep your grip secure but not tense.
Start with one foot on the raised forward pedal and the other on the ground. After pushing off, put the second foot on its pedal and alternate pressure.
A moving rider maintains balance through small steering corrections. Steering toward a lean moves the wheel contact points under the rider and bicycle. Balance also depends on speed, the bicycle, and the rider’s responses.
Pedal force turns the crank. The chain and gears transmit that rotation to the rear wheel, and tire contact with the ground provides the traction needed to move forward.
Brakes slow the wheels by friction. Kinetic energy increases with the square of speed, and stopping distance depends on reaction time, braking force, slope, and tire grip.
For a study of steering and balance, see reference 1.
Practice each step on flat, firm ground away from traffic. Repeat starting, gentle turns and stopping before riding farther. Once you pedal confidently, raise the saddle to a comfortable riding height with a slight knee bend at the bottom of the stroke. See the beginner teaching guide in reference 2.
Reflect on seven fundamental skills and receive suggestions for what to practice next. Choose the answer that best describes what you can do consistently in a suitable, traffic-free practice area.
This self-assessment is not a test of road readiness or a substitute for an instructor. Answers stay in this page and are cleared when it is reloaded.
Gears change how far the bicycle travels for each pedal revolution. On a derailleur system, shift while pedaling lightly and before you need the new gear.
A lower gear generally requires less pedal force for the same resistance, but more pedal revolutions for a given distance. It can help when starting or climbing.
Try the buttons to compareRoad users, parked vehicles, weather, and surface conditions affect the space and time needed to ride and stop safely.
Slow down, look in all directions, and make eye contact when possible. Signal turns when it’s safe to take a hand off the bar.
Leave space for doors to open. Watch for people in cars and avoid weaving in and out between parked vehicles.
Slow down and give yourself more braking distance. Painted lines, leaves, and metal covers can become slippery.
Evaluate the route for traffic exposure, surface quality, gradients, distance, and the rider’s experience.
Review the route and weather before leaving. Consider distance, gradient, crossing points, available cycleways, and your own endurance.
You can leave without selecting a destination or a predetermined route. Choose turns as you go, following paths and streets that suit your ability and the conditions.
Keep track of the time, weather, energy, and how to return. Consider a familiar area or a map if you want help finding your way back. You can pause, change direction, or end the ride whenever you choose.
Use these practices as a starting point and adapt them to your cycle, abilities, conditions, and local rules. Build each skill in a low-traffic environment before adding complexity.
Further guidance: Bikeability Ride Guide and Cycling UK on positioning and junctions. These sources describe UK practice; local rules differ.
Terms used throughout the guide. Components and controls can vary by bicycle.
Terminology adapted from Cycling UK’s glossary and drivetrain guide.
Published averages describe particular groups and conditions. They should not be treated as a target for a beginner or as a universal average for all bicycles.
| Measure | Reported mean | Study population and context |
|---|---|---|
| Trip speed | 15.3 km/h | Conventional bicycle group in a German naturalistic study; 28 riders. [3] |
| Number of gears | 14.0 / 18.1 | Mean bicycle gear counts for the women’s and men’s groups, respectively, in a Stockholm commuter study; 10 participants in each group. [4] |
| Commute speed | 16.8 / 20.1 km/h | Mean commute speeds in those same women’s and men’s groups, respectively. [4] |
The Stockholm groups were small and consisted of habitual, middle-aged commuters; their values do not establish a population-wide average. The German sample also included e-bike riders, but the speed shown here is for its conventional-bicycle group. Terrain, route, conditions, bicycle type, and measurement methods affect results.
Repeat starting, steering, and stopping in a traffic-free area before progressing to more complex environments.
Explore a four-week virtual bicycle training course.